曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
b) Blue wire UP relay (10) or (10A), c) Green wire DOWN relay (9) or (9A). 5) Apply a coat of varnish (TB 07-906) on the grounding lead connection. 6) Replenish the generator - refer to 12-13-03. WARNING : BEFORE ANY LANDING GEAR RETRACTION OR "NORMAL" OR "EMERGENCY" EXTENSION PROCEDURE, AND / OR LANDING GEAR CIRCUIT-BREAKER CLOSING, MAKE SURE THAT THE LANDING GEAR IMMEDIATE SURROUNDINGS ARE CLEAR (PERSONS OR THINGS). 7) Check landing gear control linkage and indicating system - refer to 32-30-00. 8) Make sure that there is no leak or hydraulic fluid seepage. 9) Trace a reference mark with red paint on pipes (2) and (3). 10) Install the inspection door 238. 11) Install the rear bench seatpan - refer to 25-12-00. 12) Install the cowling under hull 218. 13) Lower the aircraft to ground and remove the jacks - refer to 07-10-00. D. Removal of the landing gear relay NOTE : Simple operation, not described. E. Installation of the landing gear relay NOTE 1 : Simple operation, not described. 14V 28 V Pre-MOD. 163 NOTE 2 : On receipt of relays (9) and (10) and of their mounting brackets, make sure they are correctly engaged. If not, put two drops of Loctite (TB 08-908) between relay and bracket. All NOTE 3 : The line on the diode shows the cathode. AAAA Validity : Electrohydraulic generator "PRESTOLITE" 32-35 01 Page 202 (BA) JUN 01 12 1 - Electrohydraulic generator 2 - Pipe 3 - Pipe 4 - Distribution plate 5 - Nut 6 - Washer 7 - Bolt 8 - Electric wiring 9 - DOWN relay (14 V, 28 V Pre-MOD. 163) 9A - DOWN relay (28 V Post-MOD. 163) 10 - UP relay (14 V, 28 V Pre-MOD. 163) 10A - UP relay (28 V Post-MOD. 163) 11 - Bracket 12 - Frame C3 1 14323501AAADWZ24200 Electrohydraulic generator - Removal / Installation |