曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
4) Remove circlip (41) from landing gear leg (23) groove. 5) Separate sliding cylinder (42) / bearing (37) assembly from landing gear leg (23). 6) Remove bolts (50), washers (49) and disengage lever (48). 7) Remove bolt (24) and washer (47), discard nut (46) and disengage upper stop (30) from landing gear leg (23). 8) Remove hinged body (36) and securing washers (31) from landing gear leg (23). NOTE : If installed, shouldered bushing(s) (52) or shouldered bushing (52) and cage (53) are press fitted into landing gear leg (23). 9) Remove attachment fittings (28) and (29) and release restrictor (45), valve (26) and circlip (25). Discard 0-ring (27). 23 - Landing gear leg 31 - Securing washer 32 - Retaining ring 33 - 0-ring 34 - Plug 35 - 0-ring 36 - Hinged body 37 - Bearing 38 - Anti-extrusion ring 39 - 0-ring 40 - Scraper ring 41 - Circlip 42 - Sliding cylinder 43 - Stop 44 - Scissors 51 - Segment 52 - Shouldered bushing 53 - Cage Nose landing gear - Disassembly / Assembly Key to Figures 402, 402A and 402B WA Validity : Nose landing gear not equipped with thrust-bearing needle cage 32-20-00 (AM) Page 404 JUN 01 23 |