曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
- Lubricant (TB 04-004A) - Cleaning agent (TB 11-002) B. Removal of the main landing gear door 1) Jack up the aircraft - refer to 07-10-00. 2) Remove and retain clevis pin (6) and washer (10). Discard cotter pin (9). 3) Uncouple door (11) from landing gear door junction rod (8). 4) Remove screw (2) and tab (13) (if installed). 5) Remove door (11) by pulling hinge pin (1) or, if installed, (12) out of the hinge. 6) Clean the removed parts. C. Installation of the main landing gear door 1) Position the door under the wings. 2) Coat hinge pin (1) with lubricant (TB 04-004A). NOTE : Hinge pin (12), if installed, is coated with a NUFLON film, do not lubricate it. 3) Attach the door to the wings with hinge pin (1) or, if installed, (12). 4) Secure tab (13) (if installed) with screw (2). 5) Couple door (11) to landing gear door junction rod (8). 6) Secure landing gear door junction rod (8) with clevis pin (6) previously coated with lubricant (TB 04-004A), washer (10) and a new cotter pin (9). WARNING : BEFORE ANY LANDING GEAR RETRACTION OR "NORMAL" OR "EMERGENCY" EXTENSION PROCEDURE, AND / OR LANDING GEAR CIRCUIT-BREAKER CLOSING, MAKE SURE THAT THE LANDING GEAR IMMEDIATE SURROUNDINGS ARE CLEAR (PERSONS OR THINGS). 7) Retract the landing gear. 8) Check the good adjustment of the door in its well under the wings. 9) If necessary, readjust the door using landing gear door junction rod (8) adjustable end. WARNING : BEFORE ANY "NORMAL" OR "EMERGENCY" LANDING GEAR RETRACTION OR EXTENSION PROCEDURE, AND / OR LANDING GEAR CIRCUIT-BREAKER CLOSING, MAKE SURE THAT THE LANDING GEAR IMMEDIATE SURROUNDINGS ARE CLEAR (PERSONS OR THINGS). WA Validity : S / N 1 - 9999 32 10 05Page 201 (BA) JUN 01 10) Extend the landing gear. 11) Lower the aircraft to ground and remove the jacks - refer to 07-10-00. WA Validity : S / N 1 - 9999 32 10 Page 202 05 (BA) JUN 01 1 - Hinge pin 2 - Screw 3 - Rivet 4 - Half-hinge 5 - Half-hinge 6 - Clevis pin 7 - Landing gear leg 8 - Landing gear door junction rod 9 - Cotter pin 10 - Washer 11 - Door 12 - Hinge pin (variant) 13 - Tab (variant) Main landing gear door - Removal / Installation |