通航信息_通航_通用航空_General Aviation

 BUS 1
OU
OR
"ADF"
CB92 

BUS 3 PREMIERS AVIONS TB9/10 SEULEMENT
FIRST TB9/10 AIRCRAFT ONLY
 

Automatic Direction Finder (ADF) - Electrical schematic
Figure 1 - 14 volts without radio master
 
I AFAF
Validity : KR 87 / KR 87 SC+ with RMI
34 54 00Page 2
(BU) NOV 01
 
Automatic Direction Finder (ADF) - Electrical schematic
Figure 1A - 14 volts with radio master
 
INTERRUPTEUR GENERAL RADIO
RADIO MASTER SWITCH
Automatic Direction Finder (ADF) - Electrical schematic
Figure 1B - 28 volts with radio master
 
I AFAF
Validity : KR 87 / KR 87 SC+ with RM I
34 54 00Page 4
(eu) NOV 01
 

 
3. DESCRIPTION
A. A55 ADF receiver (Figure 3)
A55 ADF receiver is destined to receive signals within a frequency range from 200 KHz to 1799 KHz in 1-KHz increments. It determines the ground station bearing information which is then forwarded to the indicators for information display.
A55 ADF receiver consists of a parallelepipedic rectangular box.
The rear section of the box features an antenna receptacle and a receptacle composed of a printed board plate.
The front panel of A55 ADF receiver consists of :
- a display for frequency, mode and time information visualisation. The display brightness is automatically controlled by a photocell.
The display is divided in two windows.
The frequency in use is displayed in the L.H. window.
The R.H. window displays :
a standby frequency,
or the time elapsed since the equipment energization ("FLT" function selected),
or the time elapsed or remaining since the "ET" function initialization ("ET" function selected).
- the following controls :
the "ADF" pushbutton which determines the receiver function mode, Automatic Direction Finder (ADF) mode or antenna (ANT) mode,
the Beat Frequency Oscillator "BFO" pushbutton which permits the identification of unmodulated stations which use an interrupted carrier (A1) for identification purposes,
the "FRQ" or "FRQ/<->" pushbutton,
The receiver is at all times tuned to the frequency displayed in the L.H. window. The pushbutton enables the frequency previously selected in the R.H. window to be transferred into the L.H. window and vice-versa.
the "ET/FLT" pushbutton makes it possible to display in the R.H. window one of the two timer functions :
- the "FLT" (Flight Timer) function which measures the flight duration. The duration measurement starts as soon as equipment energization,
　
中国通航网 www.ga.cn
通航翻译 www.aviation.cn
本文链接地址：TB20 MAINTENANCE MANUAL 34 导航 TB20飞机维护手册 2(34)