|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
The COMM.NOR-ILS/GPS transceiver is a rectangular box installed in an attachment rack. Connections are made through three electrical connectors and four antenna connectors on the back panel. For the VOR/ILS functions, the front panel includes : - the display (1) subdivided in three windows. The window (3) relative to VOR/ILS functions is located in the lower L.H. part of the display. The active frequency and below it, the standby frequency are displayed in this window. - the ".C" button (7) used to energize the equipment, - the ".V" button (6) used to adjust the audio level and select the identification code of the ground station, - the "V<->" pushbutton (5) used to enable the frequency displayed in the active frequency window to flip-flop with the frequency displayed in the "STBY" window and vice-versa, - two concentric knobs (4) used to modify standby frequency when the cursor function is enabled. If necessary, press momentarily the inner concentric knob to activate cursor function, - the "CDI" pushbutton (2) used to direct the selected VOR/ILS or GPS information source towards M73 HSI or towards the M81 course deviation indicator. The COMM./VOR-ILS/GPS transceiver is electrically supplied by "BUS 1" bar and protected by CB 87 "NAV 1/GPS 1" circuit breaker. The COMM./VOR-ILS/GPS transceiver is mounted on PL30 radio rack. ANAN Validity : GNS 430 34 51-00Page 2 (DI) NOV 01 A - A78 COMMIVOR-ILS/GPS transceiver B - M81 course deviation indicator Variante de localisation Alternate location ® NAV 1 installation — Identification and location of components Figure 1 ANAN Validity : GNS 430 34-51 00 (DI) Page 3 NOV 01 |
