|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
7) If necessary, remove screws (5) and remove mounting tray (4). C. Installation of A65 emergency locator transmitter CAUTION : THE ARROW ON A65 EMERGENCY LOCATOR TRANSMITTER MUST BE DIRECTED TOWARDS THE AIRCRAFT FRONT SECTION. 1) If removed, install and secure mounting tray (4) with screws (5). 2) Install A65 emergency locator transmitter (3) in mounting tray (4). 3) Position and secure attachment plate (2) with 1/4 turn fastener (1). 4) Make sure A65 emergency locator transmitter (3) is correctly secured. 5) Connect connector (7) ensuring connection to the aircraft wiring harness. 6) Connect antenna connector (6). 7) Set emergency locator transmitter "ON-OFF-AUTO" switch to "AUTO". 8) Make sure all the tools and materials are removed and the work area is clean and free from debris. 9) Close access door 219. ABAB Validity : ELT "POINTER" 25-61-01Page 201 (CA) SEP 04 3. ADJUSTMENT / TEST - A65 EMERGENCY LOCATOR TRANSMITTER CAUTION : GIVEN THE NUISANCES THAT EMERGENCY LOCATOR TRANSMITTER OPERATIONAL TESTS GENERATE TO AIR TRAFFIC, THE OPERATOR SHALL INQUIRE ABOUT THE REGULATIONS PROPER TO THE COUNTRY WHERE THESE TESTS ARE TO BE PERFORMED. IF THE OPERATIONAL TESTS ARE NOT AUTHORIZED BY THE REGULATIONS IN FORCE IN THE COUNTRY WHERE THE TESTS ARE TO BE CONDUCTED, THE EMERGENCY LOCATOR TRANSMITTER MUST BE CHECKED IN AN APPROVED STATION. A. Tools and consumable materials II None B. Procedure I Refer to "Operation and Installation Instructions" - refer to 00-00-00. ABAB Validity :ELT "POINTER" 25-61-01Page 202 (CA) SEP 04 1 - 1/4 turn fastener |
