|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者 14) Close access door 242. 15) Close access door 219. ABAB Validity : ELT "POINTER" Page 601 25-61-00 (CA) SEP 04 PAGE INTENTIONALLY LEFT BLANK ABAB Validity : ELT "POINTER" 25-61-00Page 602 (CA) JUN 01 A65 EMERGENCY LOCATOR TRANSMITTER INSPECTION / CHECK 1. CHECK OF A65 EMERGENCY LOCATOR TRANSMITTER A. Tools and consumable materials - Standing-wave ratio metering device B. Procedure 1) Open access door 219. 2) Open access door 242. 3) Visually inspect the installation, the E50 antenna and the E50 antenna attachment for condition. 4) If installed, check the rejector for condition and make sure the connectors are correctly locked. 5) Measure the standing-wave ratio of E50 antenna. Standing-wave ratio must be lower than 3. Without rejector 6) Check continuity and insulation of E50 antenna coaxial cable. With rejector 6) Check continuity and insulation of E50 antenna / rejector coaxial cable and of A65 emergency locator transmitter / rejector coaxial cable. 7) Measure the standing-wave ratio of the assembly. Standing-wave ratio must be lower than 3. All 8) Inspect A65 emergency locator transmitter attachments for condition. 9) Make sure the expiry date on the label stuck to the box has not been reached. 10) Make sure the "MAN/RESET-OFF-AUTO" switch of the emergency locator transmitter is set to "AUTO". 11) Make sure the connector for connection to the aircraft wiring harness is locked. 12) Make sure the antenna coaxial connectors are locked. 13) Make sure the flexible antenna is installed and secured. 14) Check S130 remote control switch for correct condition and make sure it is set to "AUTO". 15) Make sure all the tools and materials are removed and the work area is clean and free from debris. 16) Close access door 242. 17) Close access door 219. ACAC Validity : ELT 90 - 91 - 96 - 97 Page 601 25-61-00 (DA) SEP 04 PAGE INTENTIONALLY LEFT BLANK ACAC Validity : ELT 90 - 91 -96-97 25-61-00Page 602 (DA) JUN 01 A65 EMERGENCY LOCATOR TRANSMITTER INSPECTION / CHECK 1. CHECK OF A65 EMERGENCY LOCATOR TRANSMITTER A. Tools and consumable materials - Standing-wave ratio metering device B. Procedure 1) Open access door 219. 2) Open access door 242. 3) Visually inspect the installation, the E50 antenna and the E50 antenna attachment for condition. 4) Measure the standing-wave ratio of E50 antenna. Standing-wave ratio must be lower than 3. 5) Check continuity and insulation of E50 antenna coaxial cable. 中国通航网 www.ga.cn 通航翻译 www.aviation.cn 本文链接地址：TB20 MAINTENANCE MANUAL 25 EQUIPMENT FURNISHINGS TB20飞机维护手册 设备及装饰(39) |
