|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
d) Install washer (42) and a new nut (43). 5) Install FWD box assembly (1) [2] and rear box assembly (7) [8]. Install washer (25). 6) Install interconnection rod (32) [33] and link rod (34) [35]. Secure with washers (20) and new cotter pins (21). 7) Install bolts (3), washers (4), washers (5) and new nuts (6). 8) Install bolts (9), washers (22) and new nuts (23). 9) Install shims (12) and adjusting shims (11). NOTE : Install 3 adjusting shims (11) maximum under the rear box only. 10) Install bolts (10), washers (13) and new nuts (14). 11) Install and secure support assembly (38) [39] with screws (47), washers (46), bolts (45) and washers (44). 12) Secure spring (30) to interconnection rod (32) [33] and spring (31) to lever (36) [37]. 13) Apply some loctite (TB 08-013C) to thread of screw (28) - refer to 20-00-08. 14) Install the external access door handle (29) with washer (26), washer (27) and screw (28). 15) Lubricate the access door mechanism - refer to 12-21-02. 16) Check the access door mechanism for correct operation. 17) Check the access door for correct locking, adjust if necessary - refer to 52-10-00. ACAC Validity : S / N 1 - 9999 Post-MOD. 151 53-80-00Page 402 18) Make sure all the tools and materials are removed and the work area is clean and free from debris. 19) Bond the sealing cloth. 20) Install the side upholstery panels. 21) Install the internal access door handle (29) with washer (26), washer (27) and screw (28). 22) Install the front seat - refer to 25-11-00. 23) If installed, operate the L.H. access door mechanism and check the rear overhead light for correct operation. Adjust if necessary - refer to 33-10-00. ACAC Validity : S / N 1 - 9999 Post-MOD. 151 53-80 00 Page 403 1 - L.H. FWD box assembly 2 - R.H. FWD box assembly 3 - Bolt 4 - Washer 5 - Washer 6 - Nut 7 - L.H. rear box assembly 8 - R.H. rear box assembly 9 - Bolt 10 - Bolt 11 - Adjusting shim 12 - Shim 13 - Washer 14 - Nut 15 - Nut 16 - Washer 17 - L.H. locking pin 18 - R.H. locking pin 19 - Nut 20 - Washer 21 - Cotter pin 22 - Washer 23 - Nut 24 - Lock 25 - Washer 26 - Washer 27 - Washer 28 - Screw 29 - Handle 30 - Spring 31 - Spring 32 - L.H. interconnection rod 33 - R.H. interconnection rod 34 - L.H. link rod 35 - R.H. link rod 36 - L.H. lever 37 - R.H. lever Access door mechanism - Removal / Installation Key to Figure 401 (1/2) ACAC Validity : S / N 1 - 9999 Post-MOD. 151 Page 404 53-80-00 (DA) SEP 04 中国通航网 www.ga.cn 通航翻译 www.aviation.cn 本文链接地址：TB20 MAINTENANCE MANUAL 53 机身 TB20飞机维护手册(26) |
