曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
5) Position the cable as marked during removal. 6) Insert cable stop (6) into control bellcrank (4) [5]. WA Validity : S / N 1 - 9999 Post-MOD. 151 53-70-00Page 403 7) Install the cable end on the footstep and the support - refer to Paragraph 2. 8) Install new tie-wraps. 9) Adjust the cable - refer to Paragraph 2. 10) Tighten nut (2). 11) Make sure all the tools and materials are removed and the work area is clean and free from debris. WARNING : PRIOR TO ANY LANDING GEAR OPERATION, MAKE SURE THE LANDING GEAR AREA IS CLEAR. 12) Check landing gear control linkage and indicating system - refer to 32-30-00. 13) Check the retractable footstep for correct operation. 14) Install the front cowling under hull 218F. 15) Install the rear cowling under hull 218A. 16) Install footstep fairing 2111R [2111L]. WA Validity : S / N 1 - 9999 Post-MOD. 151 53-70-00Page 404 PAGE INTENTIONALLY LEFT BLANK WA Validity : S / N 1 - 9999 Post-MOD. 151 53 70 00Page 405 1 - Washer 2 - Bolt 3 - R.H. support 4 - L.H. support 5 - Washer 6 - Bolt 7 - Stop 8 - Spacer 9 - Return spring 10 - Cam 11 - Spacer 12 - Cotter pin 13 - Washer 14 - Nut 15 - Control cable 16 - Cable stop stiffener 17 - Cable end 18 - Clevis pin 19 - Washer 20 - R.H. footstep 21 - L.H. footstep 22 - Pin 23 - Compression spring 24 - Nut 25 - Washer 26 - Nut 27 - Washer 28 - Bolt 29 - Bolt 30 - Washer 31 - Buffer Footstep - Removal / Installation Key to Figure 401 WA Validity : S / N 1 - 9999 Post-MOD. 151 53-70-00 Page 406 Footstep - Removal / Installation Figure 401 AW Validity : S / N 1 - 9999 Post-MOD. 151 53-70-00Page 407 (BA) SEP 04 537000AAAAYZ4000 3. DESCRIPTION |