曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
11) Disconnect interconnection rod (25) [26] and link rod (28) [29].
12) Remove FWD box assembly (1) [2] and rear box assembly (7) [8]. Retain washer (19), adjusting shims (11) and shims (12) (if installed).
2. INSTALLATION OF THE ACCESS DOOR MECHANISM (Figure 401)
A. Tools and consumable materials
- Cleaning agent (TB 11-003)
- Lintfree clean cloths
- Grease (TB 04-004A)
- Loctite (TB 08-013C)
1 - L.H. FWD box assembly
2 - R.H. FWD box assembly
3 - Bolt
4 - Washer
5 - Washer
6 - Nut
7 - L.H. rear box assembly
8 - R.H. rear box assembly
9 - Bolt
10 - Bolt
11 - Adjusting shim
12 - Shim
13 - Washer
14 - Nut
15 - Washer
16 - Nut
17 - Washer
18 - Cotter pin
19 - Washer
20 - Washer
21 - Washer
22 - Screw
23 - Handle
24 - Spring
25 - L.H. interconnection rod
26 - R.H. interconnection rod
27 - Clevis pin
28 - L.H. link rod
29 - R.H. link rod
30 - Pin
Access door mechanism - Removal / Installation
Key to Figure 401
WA
B. Procedure
1) Inspect the parts for correct condition, replace if necessary.
2) Clean the parts with lintfree clean cloths and cleaning agent (TB 11-003).
3) Install FWD box assembly (1) [2] and rear box assembly (7) [8]. Install washer (19).
4) Install interconnection rod (25) [26] and link rod (28) [29]. Secure with washers (17) and new cotter
pins (18).
5) Install bolts (3), washers (4), washers (5) and new nuts (6).
6) Install bolts (9), washers (15) and new nuts (16).
7) Install shims (12) (if installed) and adjusting shims (11).
NOTE : Install 3 adjusting shims (11) maximum under the rear box only.
8) Install bolts (10), washers (13) and new nuts (14).
9) Install clevis pin (27) and secure spring (24) to interconnection rod (25) [26].
10) Install the external access door handle.
S / N 1 - 145
a) Install washer (20) and handle (23). Install a new pin (30). S / N 146 - 9999
a) Apply some loctite (TB 08-013C) to thread of screw (22) - refer to 20-00-08.
b) Install washer (20), handle (23), washer (21) and screw (22).
11) Lubricate the access door mechanism - refer to 12-21-02.
12) Check the access door mechanism for correct operation.
13) Check the access door for correct locking, adjust if necessary - refer to 52-10-00.
14) Make sure all the tools and materials are removed and the work area is clean and free from debris.
15) Bond the sealing cloth.
16) Install the side upholstery panels.
17) Install the internal access door handle.
S / N 1 - 145
a) Install washer (20) and handle (23). Install a new pin (30). S / N 146 - 9999
a) Install washer (20), handle (23), washer (21) and screw (22).
中国通航网 www.ga.cn
通航翻译 www.aviation.cn
本文链接地址：TB20 MAINTENANCE MANUAL 53 机身 TB20飞机维护手册(22)
|
