曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
V A
1
Filter - Removal / Installation
Figure 402
ADAC
Validity : S / N 731 - 9999 28-20-02Page 407
(EA) SEP 02
PAGE INTENTIONALLY LEFT BLANK
TANK FILTER
REMOVAL / INSTALLATION
WARNING : OBEY THE SAFETY PRECAUTIONS DESCRIBED IN 28-00-00.
NOTE : This procedure is applicable to L.H. and R.H. installations. Information specific to R.H. installation are given in square brackets.
1. REMOVAL OF TANK FILTER (Figures 401 and 401A)
A. Tools and consumable materials
- Blanking caps
B. Procedure
WARNING : APPLY THE MAINTENANCE PROCEDURE OF THE FUEL TANKS — REFER TO 28-00-00.
1) Drain the related tank - refer to 12-11-02.
2) Remove the inspection door 511 [611] - refer to 52-40-00.
3) Disconnect tube (1) from end fitting (4). Blank off.
4) Remove bolts (2) and washers (3).
5) Disengage end fitting (4), discard seal (7) and disengage strainer (5).
6) Check tube (1) for condition and replace it if necessary.
S / N 731 - 9999
7) Check grommet (10) for condition and replace it if necessary.
2. INSTALLATION OF TANK FILTER (Figures 401 and 401A)
A. Tools and consumable materials
- Red paint
B. Procedure
WARNING : APPLY THE MAINTENANCE PROCEDURE OF THE FUEL TANKS — REFER TO 28-00-00.
1) Clean or replace strainer (5) if necessary.
2) Install new seal (7), strainer (5) and end fitting (4) on base (8). Attach the assembly with bolt (2) and washer (3).
3) Remove the blanking caps and connect tube (1) - refer to 20-00-02. S / N 731 - 9999
4) Make sure tube (1) is correctly engaged on support (9).
S / N 1 - 9999
5) Fill up fuel tank - refer to 12-11-01.
6) Check for leaks.
ACM
Validity : S / N 1 - 9999
28 20-03 Page 401
(DA) SEP 02
7) Mark with a red paint line nut of tube (1), end fitting (4), bolts (2) and base (8).
8) Make sure all the tools and materials are removed and the work area is clean and free from debris.
9) Install the inspection door 511 [611] - refer to 52-40-00.
ACAA
Validity : S / N 1 - 9999 28-20-03Page 402
ppo SEP 02
1 - Tube
2 - Bolt
3 - Washer
4 - End fitting
5 - Strainer
6 - Inspection door
7 - Seal
8 - Base
9 - Support
10 - Grommet
ACAA
Validity : S / N 1 - 9999 28-20-03Page 403
(DA) SEP 02
1 - Tube
2 - Bolt
3 - Washer
4 - End fitting
中国通航网 www.ga.cn
通航翻译 www.aviation.cn
本文链接地址：TB20 MAINTENANCE MANUAL 28 FUEL TB20飞机维护手册 燃油(30)
| 
