曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
CAUTION : DO NOT USE A WRENCH TO TIGHTEN KNURLED NUT (2) BECAUSE BOWL TIGHTNESS IS ENSURED BY SEAL (10) AND NOT BY BEARING FACE (a). 4) Engage bowl (7) on filter / selector (1), turn the bowl bleed, push bowl (7) so that it rests vertically on the fixed section and tighten knurled nut (2) manually. 5) Check hose (4) and clamp (3) for condition. 6) Set the fuel selector to "LEFT" or "RIGHT" position. 7) Bleed the fuel system - refer to 12-11-02. CAUTION : MAKE SURE THAT THE SELECTED TANK CONTAINS FUEL BEFORE ACTUATING THE ELECTRIC PUMP. 8) Perform a leakage test with the fuel system pressurized - refer to 28-00-00. 9) Check for leaks. ADAC Validity : S / N 731 - 9999 28-20-02Page 403 (EA) SEP 02 10) Lockwire knurled nut (2). 11) Remove the drain pan. 12) Make sure all the tools and materials are removed and the work area is clean and free from debris. 13) Install the inspection door 215. 14) Perform a test run-up - refer to 05-30-02. 1 - Washer 14 - Seal 2 - Nut 15 - Union 3 - Bolt 16 - Clamp 4 - Washer 17 - Hose 5 - Bracket 18 - Clamp 6 - Seal 19 - Bleed 7 - Union 20 - Tube 8 - Tube 21 - Filter / Selector 9 - Knurled nut 22 - Gimbal joint 10 - Bowl 23 - Cabin floor 11 - Seal 24 - Seal 12 - Union 25 - Control tube 13 - Tube 26 - Bolt MAINTENANCE MANUAL |