|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
WARNING : APPLY THE MAINTENANCE PROCEDURE OF THE FUEL TANKS — REFER TO 28-00-00. 1) The inside of the tanks requires no specific maintenance procedure or inspection. However, an endoscopic inspection is required in case of : - leakage or seepage at skin junctions, - leakage or seepage around rivet heads, - abnormal deposits in the tank strainer, - skin distortion. AMA Validity : S / N 1 - 9999 28-10-00Page 601 (BA) SEP 02 2) Perform an endoscopic inspection to determine the cause and the extent of the damage, the origin of deposits and leaks : - tearing of sealing compound, - loosening of rivets, - presence of foreign matter accidentally fallen into the tank, - clogging of draining holes of non-tight ribs, - cracks of ribs and/or spars. AMA Validity : S / N 1 - 9999 10-00 Page 602 28 (BA) SEP 02 STORAGE REPAIR WARNING : OBEY THE SAFETY PRECAUTIONS DESCRIBED IN 28-00-00. 1. TANK REPAIR A. Tools and consumable materials - Sealant (TB 09-001A) - Sealant (TB 09-002A) - Cleaning agent (TB 11-003) - Spatula - Lintfree clean cloths B. Procedure to be applied when the leak stems from a loose rivet WARNING : APPLY THE MAINTENANCE PROCEDURE OF THE FUEL TANKS — REFER TO 28-00-00. 1) Remove the defective rivet (s) - refer to 51-40-02. 2) Retain the heads of these rivets. 3) Remove sealant using a spatula and clean the surfaces to be sealed with a lintfree clean cloth moistened with cleaning agent (TB 11-003). 4) Apply sealant (TB 09-001A) to the surfaces to be sealed. 5) Install appropriate new rivets - refer to 51-40-02. NOTE : To implement water / air tight products, refer to the manufacturer's instructions. Fuel the tanks when the sealant curing is completed. C. Procedure to be applied when the leak does not stem from a loose rivet WARNING : APPLY THE MAINTENANCE PROCEDURE OF THE FUEL TANKS — REFER TO 28-00-00. 1) Clean the area around the leak with cleaning agent (TB 11-003). 2) Apply sealant (TB 09-001A) if the sufaces to be sealed are small. 3) Apply sealant (TB 09-002A) if the area to be sealed is large or requires a continuous sealant bead. NOTE : If access to the inside of the tank is impossible, apply a sealant bead (TB 09-002A) to the involved exterior face. For tank doors tightness - refer to 52-40-00. WA Validity : S / N 1 - 9999 28 10-00Page 801 (BA) SEP 02 PAGE INTENTIONALLY LEFT BLANK AAAA Validity : S / N 1 - 9999 28-10-00Page 802 (BA) SEP 02 FUEL SUPPLY DESCRIPTION AND OPERATION 1. GENERAL Fuel supply system is the sub-system which supplies engine with fuel necessary for its operation. Its main components are : 中国通航网 www.ga.cn 通航翻译 www.aviation.cn 本文链接地址：TB20 MAINTENANCE MANUAL 28 FUEL TB20飞机维护手册 燃油(17) |
