曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
8) Lock the cap and record the value which must be 80 N.m (+ 10 ; - 0). 9) Repeat steps 4), 5) and 8) until obtaining the correct value. 10) Unlock tank cap (5), remove spring scale (6) and tool (7) and put a new cotter pin (4). 11) Make sure all the tools and materials are removed and the work area is clean and free from debris. 12) Install and lock tank cap (5). 2. CHECK OF TANK CAP LOCKING FORCE (Figure 301) A. Tools and consumable materials - Tool for tank cap, P/N TB86100TB10 52000100 - Spring scale 0 - 89 lbf.in (0 - 200 N.m), Ref. ESO 563 or equivalent - Oil (TB 03-900A) B. Procedure 1) Unlock tank cap (5). 2) Check 0-ring (2) for condition, replace it if necessary. 3) Lubricate hinge pin of handle assembly (1) with oil (TB 03-900A). ABAB Validity Cap SHAW AERO 531-099 28 1 0_00 (DA) Page sEp30021 4) Position tank cap (5) into its housing without locking it. 5) Screw tool (7) on spring scale (6) and position the assembly on handle assembly (1). 6) Lock the cap and record the value which must be 80 N.m (+ 10 ; - 0). 7) If necessary, adjust locking force - refer to Paragraph 1. 8) Unlock tank cap (5), remove spring scale (6) and tool (7). 9) Make sure all the tools and materials are removed and the work area is clean and free from debris. 10) Install and lock tank cap (5). ABAB Validity : Cap SHAW AERO 531-099 28 10-00Page 302 (DA) SEP 02 1 - Handle assembly |