通航信息_通航_通用航空_General Aviation

33
 
14273003AAAKYZ4001 Elevator trim tab control - Inspection / Check
Figure 603
I ABAC
Validity : S / N 1 - 9999 27-30-03Page 606
(DA) SEP 04
 
ITEM
THEORETICAL
DIMENSION MAXI WEAR
DIMENSION * SPACER
EXTERNAL DIA. SPACER
INTERNAL DIA. DECISION
ACTION
1 Ext. dia. 0.3149/0.2786 in
(8.0/7.078 mm)
Int. dia. 0.198/0.1999 in
(5.030/5.078 mm) Ext. dia. 0.2781 in
(7.064 mm)
Int. dia. 0.2009 in
(5.105 mm)   
2     
3     
4 Ext. dia.0.3937/0.3574 in
(10.0/9.078 mm)
Int. dia. 0.2374/0.2392 in
(6.030/6.078 mm) Ext. dia. 0.3559 in
(9.042 mm)
Int. dia. 0.2403 in
(6.105 mm)   

ITEM THEORETICAL
DIMENSION MAXIMUM WEAR
DIMENSION FRAME C9
BELLCRANK DECISION ACTION
5 Dia. 0.3149/0.3190 in
(8.0/8.105 mm) Dia. 0.3158 in
(8.022 mm)  
6    
7    

Elevator trim tab control
Table 601 (1/2)
 

ITEM THEORETICAL
DIMENSION MAXIMUM WEAR
DIMENSION * L.H. SIDE R.H. SIDE DECISION
ACTION
8 Dia. 0.2362/0.2369 in
(6.0/6.018 mm) Dia. 0.2374 in
(6.030 mm)   
9 Dia. 0.198/0.1999 in
(5.030/5.078 mm) /   

ITEM THEORETICAL
DIMENSION MAXIMUM WEAR
DIMENSION * ROD DECISION ACTION
10 Dia. 0.3937/0.3945 in
(10.0/10.022 mm) Dia. 0.3959 in
(10.058 mm)  
11 Dia. 0.1968/0.1975 in
(5.0/5.018 mm) Dia. 0.1987 in
(5.048 mm)  

(*) Maximum wear dimension without elongation or scratches.
Bolts have to be replaced if they are out-of-tolerance, scratched or with pitting or corrosion marks :
- bolts (12) = dia. 0.1968/0.1921 in (5.0/4.880 mm),
- bolt (13) = dia. 0.1964/0.1959 in (4.990/4.978 mm),
- bolt (14) = dia. 0.2358/0.2353 in (5.990/5.978 mm).
Elevator trim tab control
Table 601 (2/2)
ABAC
Validity : S / N 1 - 9999 27 30 03 (DA) Page
 
STALL WARNING DEVICE
MAINTENANCE PRACTICES
1. SERVICING
None
2. REMOVAL / INSTALLATION - STALL WARNING DEVICE (Figure 201)
A. Tools and consumable materials
None
B. Removal of stall warning device
1) Remove screws (1).
2) Clear warning device (6) and its bracket (7) from the front, disconnect electrical wires (2) to remove the warning device.
3) If necessary, remove warning device (6) from bracket (7), retain bolts (4) and washers (3), discard nuts (5).
　
中国通航网 www.ga.cn
通航翻译 www.aviation.cn
本文链接地址：TB20 MAINTENANCE MANUAL 27 FLIGHT CONTROLS TB20飞机维护手册 飞行操纵(53)