|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者 12 - "Nose up" marking 13 - Travel jig 14 - "Nose down" marking ® 5 6 7 Elevator trim tab - Travel adjustment Figure 501A - With travel jiq ADAD Validity : Post-MOD. 50 or Kit OPT10 911800 27 30 03 (DA) MAR 0 Page 5040 Elevator trim tab cables - Tension setting Figure 502 ADAD Validity : Post-MOD. 50 or Kit OPT10 911800 aeR50005 27-30-03 (DA) PmgA TEMPERATURE °C 10 20 30 40 50 50 70 90 110 TEMPERATURE °F Elevator trim tab cables - Tension setting Table 501 ADAD Validity : Post-MOD. 50 or Kit OPT10 911800 27 30-03Page 506 (DA) SEP 02 ELEVATOR TRIM TAB CONTROL INSPECTION / CHECK 1. CHECK OF ELEVATOR TRIM TAB CONTROL A. Tools and consumable materials - Cleaning agent (TB 11-002) Clean lintfree cloths - Inside micrometer - Palmer - Grease (TB 04-004A) B. Preliminary steps (Figure 602) 1) Make sure that the main switch-breaker is open. 2) Install the warning sign prohibiting main switch-breaker operation. WARNING DO NOT OPERATE MAINTENANCE WORK IN PROGRESS 3) Remove the cowling under hull 218. 4) Remove tail cone 222 - refer to 53-20-00. S / N 341 - 9999 and S / N 275 - 340 Post-Kit OPT10 908700 5) Remove cover (14) from trim tab actuator. All 6) Open baggage compartment door 219 and remove baggage compartment bottom door 242. 7) Remove the central pedestal - refer to 25-14-00. 8) Remove the tunnel - refer to 25-15-00. C. Check of trim tab control (Figures 601, 602 and 603) 1) Check trim control wheel (3) for : S / N 275 - 587, 589 - 599, 601 - 609 - correct safetying of bolt (5) nut with a cotter pin, S / N 588, 600, 610 - 9999 - correct safetying of bolt (5) with the lockwasher, ABAC Validity : S / N 1 - 9999 27-30-03Page 601 (DA) SEP 04 - correct winding of the cable on reel (4), - condition of cable - refer to 20-00-07, - correct tightening of cable-guard (6) attaching nuts. 2) Check pulleys (1) and (2) for : - condition - refer to 20-00-07, - correct safetying of bolts attaching nuts (8) with cotter pins, - correct tightening of cable-guard attaching nuts (7) on brackets (9). 3) Check pulley brackets (9) for : - cracks, evidence of corrosion and loose rivets. 4) Check safetying of turnbuckles (13). 5) Check elevator trim tab actuator for : - correct safetying of actuator attaching nuts (16) on its bracket (18) with cotter pins, 中国通航网 www.ga.cn 通航翻译 www.aviation.cn 本文链接地址：TB20 MAINTENANCE MANUAL 27 FLIGHT CONTROLS TB20飞机维护手册 飞行操纵(51) |
