曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
4) Remove the blanking plugs, connect pipes (6) and (15) - refer to 20-00-02. 5) Remove the blanking plug, connect vent hose (10) and secure it with a new clamp (9). 6) Connect cooling pipe (14) to cranking box (8) and secure it with clamp (13). 7) Set fuel selector to "LEFT" or "RIGHT" position. 8) Bleed the fuel system - refer to 12-11-02. WARNING : MAKE SURE THAT THE SELECTED TANK CONTAINS FUEL BEFORE ACTUATING THE ELECTRIC PUMP. 9) Perform a leakage test with the fuel system pressurized - refer to 28-00-00. 10) Check for leaks. 11) Mark with a red paint line nuts of pipes (6) and (15) and unions (5), (7) and (16) if removed. 12) Apply varnish (TB 07-901) to electrical connections. 13) Remove the drain pan. 14) Make sure all the tools and materials are removed and the work area is clean and free from debris. 15) Install the engine cowlings - refer to 71-10-01. 16) Perform a test run-up - refer to 05-30-02. ACAA Validity : S / N 1 - 9999 73-10 Page sEp40022 01 (DA) 1 - Seal 2 - Engine pump 3 - Pressure switch 4 - Grounding wire 5 - Union 6 - Pipe 7 - Union 8 - Cranking box 9 - Clamp 10 - Vent hose 11 - Bolt 12 - Washer 13 - Clamp 14 - Cooling pipe 15 - Pipe 16 - Union ACM 1 - Seal |