|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
6) Make sure the message "GOOD" is displayed for 3 seconds. NOTE : If the word "BAD" and an error message appear, it means that the indicator does not operate correctly. In this case, remove it and send it to the manufacturer. 7) Make sure "K" factor and the unit of measure are displayed. 8) Make sure the maximum quantity of usable fuel is displayed. 9) Make sure software version is displayed. 10) End of the test and return to continuous display of fuel flow. 11) Wait for one minute min. then open main switch-breaker. 12) Disconnect the ground power unit - refer to 24-40-00. ABAB Validity : With SHADIN 912041T-38D fuel flowmeter 73-30 03Page 503 (CA) SEP 02 1 - Fuel flow indicator 2 - Flow transmitter 3 - "K" factor 4 - "CAUTION" red adhesive label SW SW SW SW 1 2 3 4 EiCi®®0) 4 Fuel flow indicator - Adjustment test Figure 501 ABAB Validity : With SHADIN 912041T-38D fuel flowmeter Page 504 73-30-03 (CA, SEP 02 中国通航网 www.ga.cn 通航翻译 www.aviation.cn 本文链接地址：TB20 MAINTENANCE MANUAL 73 发动机燃油和控制 TB20飞机维护手册(19) |
