|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
2) Check central console condition, inspect for possible cracks and deformation. 3) Check the bonding areas, clean the surfaces with a clean cloth moistened with cleaning agent (TB 11-003). 4) Position the central console equipped with its racks while paying attention to the windshield. NOTE : Be sure to correctly insert centering pin (5) in the hole provided in cross beam (6). 5) Secure the central console using screws (3), washers (2) and pins (4) (if installed). 6) Connect all the connectors ; if necessary, spray the connections with cleaner (TB 05-920). 7) Install the radio instruments. CAUTION : INSTALL TIE-WRAPS (WIRINGS, HOSES AND OTHER ITEMS ATTACHMENTS) IN SUFFICIENT QUANTITIES IN ORDER TO AVOID ANY BLOCKAGE OF FLIGHT CONTROLS. 8) Remove the blanking caps and connect cooling hose(s) (7) (if installed). 9) If installed, reconnect the static system hose of the autopilot. 10) Make sure all the tools and materials are removed and the work area is clean and free from debris. 11) Tilt R.H. instrument panel (16) - refer to 31-10-01. 12) Tilt and lock L.H. instrument panel (11) - refer to 31-10-01. 13) Install upholstery panels (10) and (15) behind the instrument panels. 14) In the case of non-raised consoles, connect and install compass (13). 15) Install engine monitoring cluster (14) - refer to 31-10-03. 16) Install central console upholstering (1). a) In the case of raised consoles, secure compass (13) on upholstering (1). b) Engage the upholstering from the top while paying attention to compass (13). AAAA Validity : Pre-MOD. 151 31 10-02Page 402 (BA) SEP 04 c) Connect the lighting wires of the central console and, in the case of raised consoles, compass (13). d) Clip upholstering (1) to pins (4) (if installed) and fix in place using screws (8) and washers (9). 17) Remove the warning sign prohibiting main switch-breaker operation. 18) Connect the battery - refer to 24-30-02. 19) Close main switch-breaker. 20) Using the test units, perform a functional test of the navigation systems. 21) Perform a radio test - refer to 23-10-00. 22) If necessary, perform a leakage test of the static system - refer to 34-11-00. 23) Perform an autopilot test - refer to 22-12-00. 24) Position the aircraft on a compensating area. 25) Perform a test run-up - refer to 05-30-02. 26) Check the parameters of the engine monitoring cluster. 27) Check the compass and, if necessary, perform a compensation - refer to 34-20-01. WA Validity : Pre-MOD. 151 31-10 02 (BA) Page 403 SEP 04 中国通航网 www.ga.cn 通航翻译 www.aviation.cn 本文链接地址：TB20 MAINTENANCE MANUAL 31 指示/记录系统 TB20飞机维护手册(9) |
