|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
1 - Upholstering 2 - Washer 3 - Screw 4 - Pin 5 - Centering pin 6 - Cross beam 7 - Hose 8 - Screw 9 - Washer 16 10 - Upholstery panel 11 - L.H. instrument panel 12 - Lower side panel 13 - Compass 14 - Engine monitoring cluster 15 - Upholstery panel 16 - R.H. instrument panel 1 Central console Figure 401 AAAA Validity : Pre-MOD. 151 31-10 02Page 404 (BA) SEP 02 1 - Upholstering 2 - Washer 3 - Screw 4 - Pin 5 - Centering pin 6 - Cross beam 7 - Hose 8 - Screw 9 - Washer 16 10 - Upholstery panel 11 - L.H. instrument panel 12 - Lower side panel 13 - Compass 14 - Engine monitoring cluster 15 - Upholstery panel 16 - R.H. instrument panel 1 6 5 Central console Figure 401A - With radio cooling WA Validity : Pre-MOD. 151 31-10 02Page 405 (BA) SEP 02 AAAA Validity : Pre-MOD. 151 Central console Figure 401 B - With raised central console and radio cooling 31-10 0 Page 406 2 (BA) SEP 02 CENTRAL CONSOLE REMOVAL / INSTALLATION 1. REMOVAL OF CENTRAL CONSOLE (Figure 401) A. Tools and consumable materials - Blanking caps B. Procedure 1) Make sure that the main switch-breaker is open. 2) Install the warning sign prohibiting main switch-breaker operation. WARNING DO NOT OPERATE MAINTENANCE WORK IN PROGRESS 3) Disconnect the battery - refer to 24-30-02. 4) Remove console upholstering (1) : a) Remove screws (8) and washers (9). b) At the console base, clear the upholstering from L.H. and R.H. strips and unclip the upholstering from pins (4). c) Clear the upholstering upwards and disconnect compass (13). d) Disconnect console lighting wires and remove upholstering (1). 5) Remove engine monitoring cluster (14) - refer to 31-10-03. 6) Remove upholstery panels (10) and (15) behind the instrument panels 7) Unlock and tilt L.H. instrument panel (11) - refer to 31-10-01. 8) Tilt R.H. instrument panel (16) - refer to 31-10-01. 9) Disconnect, on blower side, hoses (7) ensuring the cooling of the central console and the autopilot (if installed) ; blank off. NOTE : This operation is not essential but it reduces the central console volume. 10) If installed, disconnect and blank off the autopilot static system hose. 11) Disconnect all the radio connectors and the coaxial cables of the central console. 12) Cut off and discard the tie-wraps securing the wiring, hoses and other items necessary for the removal of the console. 13) Remove the different radio instruments by pulling them out of their racks from the rear - refer to each instrument handbook for attachment on racks. 中国通航网 www.ga.cn 通航翻译 www.aviation.cn 本文链接地址：TB20 MAINTENANCE MANUAL 31 指示/记录系统 TB20飞机维护手册(10) |
