曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
(GA) SEP 04 Pression d'huile Temperature d'huile Jaugeurs Oil pressure Oil temperature Fuel gauges Engine monitoring cluster marking Figure 3D - Post-MOD. 182 AFAA Validity : S / N 1 - 9999 31-10-00Page (GA) SEP 04 PAGE INTENTIONALLY LEFT BLANK AFAA Validity : S / N 1 - 9999 31-10-00Page 12 (GA) SEP 04 INSTRUMENT PANEL REMOVAL / INSTALLATION NOTE : This procedure is applicable to L.H. and R.H. installations. Information specific to R.H. installation are given in square brackets. 1. REMOVAL OF INSTRUMENT PANEL (Figure 401) A. Tools and consumable materials None B. Procedure 1) Disconnect the battery - refer to 24-30-02. 2) Install the warning sign prohibiting battery connection. WARNING DO NOT CONNECT MAINTENANCE WORK IN PROGRESS S / N 1 - 274 3) Push on spring flap (9) to unlock instrument panel (3). 4) Tilt instrument panel (3) [7]. S / N 275 - 9999 3) Unlock studs (1) or remove the screws. 4) Push on spring flap (9) to unlock instrument panel (3). 5) Tilt instrument panel (3) [7]. 6) Remove screws (6), cup washers (5) and upper cover (2) [4]. S / N 1 - 9999 7) Disconnect all the instruments and all the electrical connectors of instrument panel (3) [7]. 8) Remove hinge pins (8). 9) Remove instrument panel (3) [7]. 10) If necessary, remove instrument panel (3) [7] equipment. 2. INSTALLATION OF INSTRUMENT PANEL (Figure 401) A. Tools and consumable materials None B. Procedure 1) Check the silent-blocks for condition, replace if necessary. AAAA Validity : S / N 1 - 9999 31-10 Page sp40021 01 (BA) 2) If necessary, install instrument panel (3) [7] equipment. 3) Install instrument panel (3) [7] and insert hinge pins (8) in the hinges 4) Connect the instruments and the electrical connectors. 5) Make sure all the tools and materials are removed and the work area is clean and free from debris. S / N 1 - 274 6) Tilt instrument panel (3) [7]. 7) Make sure instrument panel (3) is correctly locked. S / N 275 - 9999 6) Install and secure upper cover (2) [4] with cup washers (5) and screws (6). 7) Tilt instrument panel (3) [7]. 8) Make sure instrument panel (3) is correctly locked. 9) Lock studs (1) or install the screws. S / N 1 - 9999 10) Connect the battery - refer to 24-30-02. 11) Remove the warning sign prohibiting battery connection. 12) Do a test of the different electric systems and instruments. 1 - Stud 2 - L.H. upper cover 中国通航网 www.ga.cn 通航翻译 www.aviation.cn 本文链接地址:TB20 MAINTENANCE MANUAL 31 指示/记录系统 TB20飞机维护手册(7) |