返回首页
当前位置: 主页 > 通航资料 > TB >

TB20 MAINTENANCE MANUAL 31 指示/记录系统 TB20飞机维护手册(11)

时间:2011-11-03 12:07来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
  
14) Remove screws (3) and washers (2) ensuring lower attachment.
15) Remove the 2 pins (4).
 
CAUTION : BEFORE CLEARING THE CONSOLE, MAKE SURE NO AIRCRAFT WIRING, HOSE OR OTHER ITEM CLOSE TO THE CONSOLE IS SECURED ON IT.
16) Clear the central console equipped with its racks from centering pin (5) while avoiding the windshield. 2. INSTALLATION OF CENTRAL CONSOLE (Figure 401)
A. Tools and consumable materials
- Cleaner (TB 05-920)
- Cleaning agent (TB 11-003)
- Tie-wraps
- Clean, lint-free cloths
B. Procedure
1) Check cooling hoses (7) for condition, replace if necessary.
NOTE : If a new hose is installed, no traces of release grease (silicone) must remain inside the hose. Any traces must be removed with a dry cloth.
2) Check central console condition, inspect for possible cracks and deformation.
3) Check the bonding areas, clean the surfaces with a clean cloth moistened with cleaning agent (TB 11-003).
4) Position the central console equipped with its racks while paying attention to the windshield.
NOTE : Be sure to correctly insert centering pin (5) in the hole provided in cross beam (6).
5) Secure the central console using screws (3), washers (2) and pins (4).
6) Connect all the connectors ; if necessary, spray the connections with cleaner (TB 05-920).
7) Install the radio instruments.
CAUTION : INSTALL TIE-WRAPS (WIRINGS, HOSES AND OTHER ITEMS ATTACHMENTS) IN SUFFICIENT QUANTITIES IN ORDER TO AVOID ANY BLOCKAGE OF FLIGHT CONTROLS.
8) Remove the blanking caps and connect cooling hoses (7).
9) If installed, reconnect the static system hose of the autopilot.
10) Make sure all the tools and materials are removed and the work area is clean and free from debris.
11) Tilt R.H. instrument panel (16) - refer to 31-10-01.
12) Tilt and lock L.H. instrument panel (11) - refer to 31-10-01.
13) Install upholstery panels (10) and (15) behind the instrument panels.
14) Install engine monitoring cluster (14) - refer to 31-10-03.
15) Install central console upholstering (1).
a) Engage the upholstering from the top while paying attention to compass (13).
b) Connect the wiring of compass (13) and the lighting wires of the central console.
c) Clip upholstering (1) to pins (4) and fix in place using screws (8) and washers (9).
 
16)  Remove the warning sign prohibiting main switch-breaker operation.  
17)  Connect the battery - refer to 24-30-02.  
18)  Close main switch-breaker.  
19)  Using the test units, perform a functional test of the navigation systems.  
20)  Perform a radio test - refer to 23-10-00.  
21)  If necessary, perform a leakage test of the static system - refer to 34-11-00.  
22)  Perform an autopilot test - refer to 22-12-00.  
 
中国通航网 www.ga.cn
通航翻译 www.aviation.cn
本文链接地址:TB20 MAINTENANCE MANUAL 31 指示/记录系统 TB20飞机维护手册(11)
 
------分隔线----------------------------