曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Avionics systems are protected by circuit-breakers grouped in the lower part of PL1 panel. E. Switch-breakers All switch-breakers are located on PL2 central pedestal. Each switch-breaker is identified (see symbolization). Whenever an electrical incident occurs on the circuit of a switch-breaker, its setting button appears protruding. Check the circuit and reset the switch-breaker. Battery connection to the electrical network is made through the switch-breaker labeled "MAIN SWITCH". A switch labeled "RADIO MASTER" can be installed on R.H. side of the L.H. strip to control the supply of avionics and to allow automatic disconnection of avionics systems when the engine starts, or manual disconnection during abnormal conditions. 4. OPERATION When the switch is in OFF position, no electrical power will be applied to the avionics. The avionics power switch "RADIO MASTER" should be placed in the OFF position prior to turning main switch ON or OFF, or connecting an external power source and may be used instead of the individual avionics switches. "RADIO MASTER" function does not concern some optional equipment such as electric trim, autopilot, HF transceiver... ACM Validity : S / N 1 - 822, 850 - 887, 889 - 947 24-50-00Page 2 (DA) OCT 02
c?Pc, -- |