通航信息_通航_通用航空_General Aviation

issuance of an Airworthiness Certificate
Only an FAA aviation safety inspector (ASI)
or authorized representative of the Administrator
(i.e., Designees), as defined in 14 CFR Part 183,
Representatives of the Administrator, is authorized
to issue an airworthiness certificate.
Your local FAA Flight Standards District Office (FSDO) processes requests for replacement
airworthiness certificates. You should contact your
local FSDO immediately upon discovering that
you need a replacement airworthiness certificate
for your aircraft.

Applying for an Airworthiness Certificate
A registered owner may apply for an airworthiness

certificate by submitting FAA Form 8130-6, Applica-tion for U.S. Airworthiness Certificate, to your local FAA Manufacturing Inspection District Office (MIDO). You can find your local MIDO contact
information on the FAA website at www.faa.gov. Figure 3-2 at the end of this chapter is a sample
FAA Form 8130-6. You can find instructions for
completing FAA Form 8130-6 on the FAA website at www.faa.gov or in FAA Order 8130.2 (as revised).
The FAA will issue the applicable certificate if
the aircraft is eligible and in a condition for safe operation.
FAA Form 8100-2,
Standard Airworthiness Certificate
FAA Form 8100-2, Standard Airworthiness
Certificate, is issued for aircraft type certificated in
the normal, utility, acrobatic, commuter, and transport categories, or for manned free balloons.
The airworthiness certificate remains in effect as
long as the aircraft receives the required main-tenance and is properly registered in the United States. Flight safety relies, in part, on the condition of the aircraft, which may be determined on inspection by mechanics, approved repair stations,
or manufacturers that meet specific requirements
　
中国通航网 www.ga.cn
通航翻译 www.aviation.cn
本文链接地址：Plane Sense General Aviation Information 通用航空信息 1(33)