曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
I 6) Position cylinder attachment fitting (3) and secure it with bolts (6), washers (5) and new nuts (4). Torque according to "Specific cases" tightening procedure - refer to 20-00-01. 7) Wipe off excess sealant with a clean lintfree cloth moistened with cleaning agent (TB 11-003). 8) Make a bead of sealant around cylinder attachment fitting (3) with sealant (TB 09-916) - refer to 20-00-09. 9) Mark nuts (4) with a red paint line. 10) Secure actuating cylinder to cylinder attachment fitting (3) - refer to 32-30-01. 11) Make sure all the tools and materials are removed and the work area is clean and free from debris. 12) Install the cowling under hull 218F. 13) Lower the aircraft to ground and remove the jacks - refer to 07-10-00. AAAA Validity : S / N 1 - 9999 Page 404 57-20-04 (BA) SEP 04 Landing gear attachment fittings - Removal / Installation Figure 401 AAAA Validity : S / N 1 - 9999 57-20-04Page 405 (BA) JUN 02 30 - Lever 31 - Bolt 32 - Aileron control rod 33 - Washer 34 - Cotter pin 35 - Nut 36 - Cotter pin 37 - Nut 38 - Washer 39 - Bellcrank 40 - Bolt 14271002AAABYZ14000 30 Landing gear attachment fittings - Removal / Installation AAAA |