曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Validity S / N 1 - 9999 51-40-01 Page 202
(BA) APR 95
G. Special nuts
DESCRIPTION SOCATA SP / CN *
Floating anchor nut "RAPID NU" nut
Sheet metal nut ZOO.N5385
ZOO.N5386
ZOO.N5387
* SOCATA part numbers are intentionally incomplete. Only the first portion of the part number, giving the part type, is listed.
NOTA : For repair, sheet metal nuts ZOO.N5387 should be replaced by anchor nuts of same diameter with simple or double tab (ZOO.N5431 or ZOO.N5421).
7a:dity : S / N 1 - 9999
I 51 -
Page 203
40 - 0 1 (BA) APR 95
PAGE INTENTIONALLY LEFT BLANK
I AAAA
Validity S / N 1 - 9999 51-40-01Page 204
(BA) APR 95
RIVETS
1. GENERAL
NOTE : Theoretically, the material remaining between the hole and the part edge(s) must have a minimum dimension of 1.5 time the hole diameter. After repair (drilling to the upper diameter) and in any case, this minimum dimension will be smaller to one time the new hole diameter. In areas that are likely to corrode, it is recommended to wet the rivets before installation (addition of sealing agent such as PR).
A. Solid rivets To be used when access to both sides is possible.
DESCRIPTION SO C
P / NA T *A MATERIAL
Round flat head rivet Z00.N5528 AU2G
100° countersunk rivet Z00.N5548 AU2G
100° countersunk small head rivet (not availabe on sale) - used on wings Z00.N5561 AU4G
* SOCATA part numbers are intentionally incomplete. Only the first portion of the part number, giving the part type, is listed. SOCATA and manufacturer part numbers must be indicated on the purchase order.
B. Blind rivets To be used when access is possible to only one side.
DESCRIPTION SO C
P / NA T *A MATERIAL
Brazier head rivet «IMEX. Z00.N5536 AG5
Countersunk head rivet c<IMEX» Z00.N5557 AG5
120° countersunk head rivet .POP* (2.4 dia.) TAPKBS Z00.N5557
"FERO" Z00. N5529
Countersunk head rivet AVDEL MBC. Z00.N5548
Brazier head rivet c<AVDEL MBC>› Z00.N5529
"CHERRY MAX"
"CHERRY LOCK"
"HUCK"
"CHERRY NUT-PLATE"
* SOCATA part numbers are intentionally incomplete. Only the first portion of the part number, giving the part type, is listed. SOCATA and manufacturer part numbers must be indicated on the purchase order.
NOTE : - "AVDEL MBC", "CHERRY MAX", "CHERRY LOCK", "HUCK" rivets may replace "IMEX" rivets according to the repairman's stock.
- "FERO" rivets may be replaced but only after consulting SOCATA.
- 120° countersunk "POP" rivets (2.4 dia) may be replaced by "CHERRY NUT-PLATE" rivets.
中国通航网 www.ga.cn
通航翻译 www.aviation.cn
本文链接地址：TB20 MAINTENANCE MANUAL 51 标准施工/结构 TB20飞机维护手册(9)
| 
