|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
1) Drill one hole or remove material from the balance weight to increase the balance moment - refer to Figure 606. NOTE : Make sure enough material remains between the attachment holes and the lightening holes - minimum 0.31 in (8 mm). 2) Make sure balancing is correct - refer to Paragraph 1. D. Aileron balancing re-adjustment procedure 1) Apply a coat of paint on the leading edge (forward of the hinge axis) to reduce the balance moment. 2) Apply a coat of paint on the section aft of the hinge axis to increase the balance moment. 3) Make sure balancing is correct - refer to Paragraph 1. ABAA Validity : S / N 1 - 9999 51-60-00Page 604 (CA) SEP 04 Potence d'equilibrage Balancing post AU4G ep. : 1,6 mm AU4G thick. : 0.06 in AU4G op. 1,6 mm AU4G thick. : 0.06 in h = 237 mm moins Is hauteur de la balance h = 9.33 in minus scale height h PROFONDEUR ELEVATOR h Gabarit de gouverne de profondeur Elevator template 100 mm 4 in 3.94 in 100 mm 11 3.94 in Tools - Balancing check Figure 601 ABAA Validity : S / N 1 - 9999 51 60-00Page 605 (CA) SEP 04 1 - Aileron template 2 - Scale 3 - Aileron 4 - Balancing post 264 mm 14516000AAAHVZ4200 10.39 in m 中国通航网 www.ga.cn 通航翻译 www.aviation.cn 本文链接地址：TB20 MAINTENANCE MANUAL 51 标准施工/结构 TB20飞机维护手册(25) |
