曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
- Cover the score with N* glass fabrics (TB 23-900) impregnated with resin (TB 08-926) or (TB 08-927) or (TB 08-932) after having sanded the covering area with sandpaper, - Deburr and sand with sandpaper (TB 05-916). Recouvrement en degrade Gradual covering N*: From 1 to 4 depending on defect depth WA Validity : S / N 1 - 9999 51 30-02Page 204 (BA) SEP 04 B. Heat formed plastic elements (ABS - IMPAX 7000 - ALLAX SC) Materials approved for repairs of elements made of IMPAX 7000 : - Mixture : IMPAX powder + MEK (Methyl ethyl ketone) (TB 11-003), Reduce an IMPAX 7000 plate part (TB 24-900) to powder or spangle, - Make this powder dissolve in mixture to obtain an unctuous paste. Materials approved for repairs of elements made of ABS : Mixture : ABS powder + adhesive (TB 08-920) for heat formed plastic, - Reduce an ABS plate part (TB 24-901) to powder or spangle, - Make this powder dissolve in mixture to obtain an unctuous paste, - Glass fabric (TB 23-900). Materials approved for repairs of elements made of ALLAX SC : - Mixture : ALLAX SC powder + MEK (Methyl ethyl ketone) (TB 11-003), - Reduce an ALLAX SC plate part (TB 24-902) to powder or spangle, - Make this powder dissolve in mixture to obtain an unctuous paste. NOTE : It is possible to use polyurethane sealants to seal cracks. Previously, make sure these sealants stick correctly on ALLAX SC. 1) Defect 1 : score (groove in surface, of variable depth and length) - Chamfer the score, I - Degrease with DIESTONE D (TB 11-912), - Fill the score with the mixture, - Allow to dry for 12 hours with ambient temperature, I - Deburr and sand with sandpaper (TB 05-916). Rayure Mélange de remplissage avant ragreage Score Filling mixture before trimming
14513002AAABVZ14100 1st case : REPAIR ON BOTH FACES All thicknesses |