曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
A. Magneto selector The magneto selector is located on the lower part of the L.H. instrument panel. It applies the contact of the magnetos and controls the starter relay. B. Starter The starter is secured to the L.H. front lower part of the engine. It drives the engine through the ring gear. The gearing of the driving gear and the ring gear is ensured by the helical groove of the starter shaft. After starting, the driving gear comes back to its initial position by means of a return spring. C. Starter relay The starter relay is secured to the firewall and is accessible through the engine upper cowling. It ensures the electrical continuity, necessary for starter operation, between the starter and the battery or the ground power unit. The starter relay is electrically supplied by "BUS 2" bar and protected by a fuse located on PL3 panel. ACAB Validity : With front battery 80-00-00Page 1 (DA) SEP 02 D. Starting indicator light (option) The starting indicator light is located on the advisory panel. During engine starting, its illumination indicates to the pilot that the starter is energized. 4. OPERATION When set to "START PUSH" position, the magneto selector controls the starter relay. Electrical power supply is applied to the starter via the relay. 148 0000 OA AA HW Z4100 013NOVIN Starting - Electrical schematic A - Starter |