曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
2. INSTALLATION OF STARTER 401
A. Tools and consumable materials 401
B. Procedure 402
STARTER 80-00-01 (CG) 401 "ELECTROSYSTEMS
REMOVAL / INSTALLATION 401 MHB - 6016" starter
1. REMOVAL OF STARTER 401
A. Tools and consumable materials 401
B. Procedure 401
2. INSTALLATION OF STARTER 401
A. Tools and consumable materials 401
B. Procedure 401
ADAA
Validity : S / N 1 - 9999 80-TC Page 1
(EA) SEP 04
SOCATA
TB 20 MODEL MAINTENANCE MANUAL
SUBJECT CHAPTER PAGE VALIDITY
STARTER 80-00-01 (DA) 401 "LYCOMING" starter
REMOVAL / INSTALLATION 401
1. REMOVAL OF STARTER 401
A. Tools and consumable materials 401
B. Procedure 401
2. INSTALLATION OF STARTER 401
A. Tools and consumable materials 401
B. Procedure 401
ADAA
Validity S/ N 1- 9999
80-T Page 2
C
(EA) SEP 04
STARTING
DESCRIPTION AND OPERATION
1. GENERAL (Figures 1 and 1A)
The starting system is the system which starts the engine.
The engine starting is performed either with the on-board battery or with an external electrical power source, if the aircraft is equipped with a ground power receptacle.
The engine start-up is performed using an electric starter.
The starting system consists of :
- the starter,
- the starter relay,
- the magneto selector - refer to 74-10-00,
28-Volt aircraft
- the starting indicator light (option) on advisory panel - refer to 31-50-00. 1 2. LOCATION (Figures 2, 2A and 2B)
COMPONENT QTY AREA ACCESS DOOR REFERENCE
Starter 1 130 131 80-00-01
Starter relay 1 210 218A 80-00-00
Magneto selector 1 254L / 74-10-00
Advisory panel 1 251L / 31-50-00
3. DESCRIPTION
A. Magneto selector
The magneto selector is located on the lower part of the L.H. instrument panel. It applies the contact of the magnetos and controls the starter relay.
B. Starter The starter is secured to the L.H. front lower part of the engine. It drives the engine through the ring gear.
The gearing of the driving gear and the ring gear is ensured by the helical groove of the starter shaft. After starting, the driving gear comes back to its initial position by means of a return spring.
C. Starter relay
The starter relay is secured to frame C4 and is accessible through the rear cowling under hull. It ensures the electrical continuity, necessary for starter operation, between the starter and the battery or the ground power unit.
中国通航网 www.ga.cn
通航翻译 www.aviation.cn
本文链接地址:TB20 MAINTENANCE MANUAL 80 起动 TB20飞机维护手册(2)
|