曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
3) Position fire extinguisher (1) on bracket assy (2), with the pressure gage visible and directed towards the exterior of the aircraft.
4) Position fire extinguisher (1) into bracket assy (2). With MAIP H1-10-600 support
3) Install fire extinguisher (1) in bracket assy (2) and make sure transportation handle (3) and nozzle (4) are correctly positioned.
4) Lock flange (5).
ABAB
Validity : MAIP 26 20 01Page 401
(CA) SEP 04
1 - Fire extinguisher
2 - Bracket assy
3 - Transportation handle
Fire extinguisher - Removal / Installation
Figure 401
ABAB
Validity : MAIP 26-20-01Page 402
(CA) SEP 04
1 - Fire extinguisher
2 - Bracket assy
3 - Transportation handle
4 - Nozzle
5 - Flange
14262000AAABWZ14201
Fire extinguisher - Removal / Installation
Figure 401A
ABAB
Validity : MAIP 26-20 Page sEp40043
01 (CA)
PAGE INTENTIONALLY LEFT BLANK
ABAB
Validity : MAIP 26-20 01Page 404
(CA) SEP 04
FIRE EXTINGUISHER
REMOVAL / INSTALLATION
1. REMOVAL OF THE FIRE EXTINGUISHER (Figure 401)
A. Tools and consumable materials
None
B. Procedure
1) If necessary, move pilot seat aft.
2) Unlock flange (3) and remove fire extinguisher (1) from bracket assy (2).
2. INSTALLATION OF THE FIRE EXTINGUISHER (Figure 401)
A. Tools and consumable materials
None
B. Procedure
1) Inspect bracket assy (2) for condition.
2) Inspect fire extinguisher (1) for condition and service life.
3) Position fire extinguisher (1) on bracket assy (2), with the pressure gage visible and directed towards the exterior of the aircraft.
4) Lock flange (3).
ACAC
Validity : RC INDUSTRIE 26-20-01Page 401
(DA) SEP 04
1 - Fire extinguisher
2 - Bracket assy
3 - Flange
14262000AAAAWZ4101 Fire extinguisher - Removal / Installation
Figure 401
ACAC
Validity : RC INDUSTRIE 26-20-01Page 402
(DA) SEP 04
FIRE EXTINGUISHER
REMOVAL / INSTALLATION
NOTE : When an "AREOFEU" fire extinguisher is replaced with a "L'HOTELLIER" fire extinguisher,
blank off the unused attachment hole of the support with a bolt coated with sealant
(TB 09-002A).
1. REMOVAL OF THE FIRE EXTINGUISHER (Figure 401)
A. Tools and consumable materials None
B. Procedure
1) If necessary, move pilot seat aft.
2) Open straps (3) with "VELCRO" tapes.
3) Grasp transportation handle (4) and pull fire extinguisher (1) up to remove it from bracket assy (2).
中国通航网 www.ga.cn
通航翻译 www.aviation.cn
本文链接地址：TB20 MAINTENANCE MANUAL 26 FIRE PROTECTION TB20飞机维护手册 防火(6)
| 
