曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
b) Strip the fuselage area in contact with antenna (1), at 0.01 in (2 mm) inside the contour drawn with the soft lead pencil. c) Clean the stripped area with a cloth moistened with cleaning agent (TB 11-912). Wipe with a dry cloth. d) Protect the stripped area with Alodine (TB 13-002). 3) Make sure bonding area (4) is clean. Clean the surface with a cloth moistened with cleaning agent (TB 11-912). Wipe with a dry cloth. 4) Position the retained bonding gasket (3) or a new bonding gasket - refer to the Illustrated Parts Catalog. 5) Position and secure antenna (1) with screws (2). 6) Connect connector (6). 7) Make sure all the tools and materials are removed and the work area is clean and free from debris. Aircraft with overhead panel 241 8) Position and secure the overhead panel. 9) Connect and secure the radio loudspeaker. 10) Install the radio loudspeaker grille. • Aircraft without overhead panel 241 8) Position and secure antenna cover (7) with screws (11) and washers (12). 9) If necessary, position and secure antenna cover upholstering (8) with screws (9) and washers (10). All 11) Apply a bead of sealant (TB 09-903) around the antenna / fuselage junction. II 12) Seal the heads of screws (2) with sealant (TB 09-903). 13) Perform an operational test of COM 2 system. Ity : Option Pre-MOD. 151 7alAA Validity Na ev20012 23-13-02 (BA) Pgo 14231000AAAAYZ14202 1 Antenna - Removal / Installation |