|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
NOTE : Slightly press the transparent panel periphery to level adhesive. 14) Clean excess sealant around washers (3) with a lintfree clean cloth moistened with isopropyl alcohol (TB 10-002). 15) Clean excess adhesive with a lintfree clean cloth moistened with cleaning agent (TB 11-921). 16) Allow to dry. 17) Protect transparent panel (5) [6] with adhesive tape (TB 08-919A) so that only the location of sealant bead (10) appears. 18) Make sealant bead (10) with sealant (TB 09-900) - refer to 20-00-09. 19) Remove adhesive tape from access door (1) [2] and transparent panel after sealant partial drying (12 to 24 hours). 20) Wait for complete curing of sealant (TB 09-900). 21) Remove the protection of transparent panel (5) [6] and check access door (1) [2] for correct operation. Close the access door. 22) Sprinkle access door (1) [2] to check its tightness. 23) Make sure all the tools and materials are removed and the work area is clean and free from debris. ACAD Validity : S / N 1 - 9999 Post-MOD. 151 56 30-00Page 402 24) Install the upholstery panel on access door (1) [2]. 25) Perform paint touch-ups as required - refer to 20-00-03. 26) Clean transparent panel (5) [6] - refer to 12-22-04. ACAD Validity : S / N 1 - 9999 Post-MOD. 151 30-00 Page 403 56 (EA) SEP 04 1 - L.H. access door 2 - R.H. access door 3 - Washer 4 - Screw 5 - L.H. transparent panel 6 - R.H. transparent panel 7 - Seal 8 - Contact surface 9 - Adhesive tape 10 - Sealant bead 11 - Rubber stop A - A Access door transparent panel - Removal / Installation |
