|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
12) Apply sealant (TB 09-919) on the seating face of washers (2) - refer to 20-00-09. 13) Install rear transparent panel (4) [5] with washers (2) and screws (3). Moderately tighten screws (3) to avoid rear transparent panel cracking. NOTE : Slightly press the rear transparent panel periphery to level adhesive. 14) Clean excess sealant around washers (2) with a lintfree clean cloth moistened with isopropyl alcohol (TB 10-002). 15) Clean excess adhesive with a lintfree clean cloth moistened with cleaning agent (TB 11-921). 16) Allow to dry. 17) Protect the rear transparent panel with adhesive tape (TB 08-919A) so that only the location of sealant bead (9) appears. 18) Make sealant bead (9) with sealant (TB 09-917) - refer to 20-00-09. 19) Remove adhesive tape from the rear transparent panel and the upper fuselage panel after sealant partial drying (12 to 24 hours). 20) Wait for complete curing of sealant (TB 09-917). 21) Remove the protection of rear transparent panel (4) [5] and close the access door. 22) Sprinkle the rear transparent panel (4) [5] to check its tightness. 23) Make sure all the tools and materials are removed and the work area is clean and free from debris. 24) Install the upholstery panel of the rear transparent panel. 25) Perform paint touch-ups as required - refer to 20-00-03. 26) Clean rear transparent panel (4) [5] - refer to 12-22-04. 1 - Upper fuselage panel Rear transparent panel - Removal / Installation AAAA |
