返回首页
当前位置: 主页 > 通航资料 > 通航机场 >

GENERAL AVIATION AIRPORT RULES AND REGULATIONS 通航机场规定和规章(2)

时间:2011-11-29 13:55来源:蓝天飞行翻译 作者:航空

To view this page ensure that Adobe Flash Player version 9.0.124 or greater is installed.

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
  

4.  
The security access badges may not be modified or altered in any way.

5.  
The badge holder must safeguard his/her security access badge at all times. Lost or stolen access badges must be reported immediately to the Airport Badging Office, at (408) 277-5419 (24 hours).

6.  
The expiration date is printed on each badge.  The badge is not valid and will not provide access beyond that date and must be renewed on/or before that date.

7.  
Individuals without Airport approved identification or proper escort should be approached and questioned.  If they are not able to produce proper identification, please notify the San Jose Police Department by calling 9-1-1.

 

Aircraft Operations
1.  
Transient aircraft are prohibited in GA West and are required to use an FBO for Aircraft Parking and/or servicing. Tenants allowing transient aircraft to park in GA West will be in violation of the Rules and Regulations.

2.  
Spaces in GA West area are assigned to a specific aircraft. Transient aircraft or aircraft not identified for that space are not permitted to use a tenants assigned space at any time and may be relocated at owner’s expense.

 

USE OF ACCESS BADGES
In order for a badge holder to be granted access through a badge reader controlled vehicle gate, the following procedures are to be used:
1.  
Hold badge with the black magnetic stripe facing the reader and at the top of the badge.

2.  
Insert badge into the slot opening on right side of the reader.

3.  
Swipe badge through the slot from right to left in one continuous motion.

4.  
The status light on the right side of the reader will show steady red to indicate that access has been granted and that the gate will open.


NOTE: When a badge is used in a particular reader for the very first time, there will be a 3 to 4 second delay before access is granted.  The badge is being “initialized” into the reader.  The status light will rapidly flash red during this process (4 to 5 flashes per second) and then show steady red to indicate the process is completed and access has been granted.
 
中国通航网 www.ga.cn
通航翻译 www.aviation.cn
本文链接地址:GENERAL AVIATION AIRPORT RULES AND REGULATIONS 通航机场规定和规章(2)
 

------分隔线----------------------------